Australia and New Zealand Forum Serving Australian and New Zealand Rotary members

anyone dynoed their twin turbo FD?

Thread Tools
 
Search this Thread
 
Old 08-28-06, 12:53 AM
  #1  
Full Member

Thread Starter
 
kerry chandler's Avatar
 
Join Date: Oct 2004
Location: new zealand
Posts: 168
Likes: 0
Received 0 Likes on 0 Posts
anyone dynoed their twin turbo FD?

Just curious how much NZ and Aust FDs put out on the dynos down here.Noticed on most american dynos the FDs seem to put out a lot of power with their stock twins and bolt ons (300+HP @12 something pounds).I had mine on the dyno last
week and only managed 186KW@ wheels (around 250+HP) boost was only 9 pounds though and AFRs dipping under 11s (PFC not tuned properly yet).Ran on Dyno Dynamics dyno.Just wanna know how much power you made especially
interested with the stock twins and bolt on bits and how much boost you running.
Will try and run it again if I manage to borrow a wideband AFR meter so I can do a bit of fuel adjustment,dont wanna pay too much for dyno time.

My Mods:
HKS RS Intake
80 mm d/p
80 catback (no cat)
RE Amemiya SMIC
Power FC
9 psi and very rich mixtures 10.8:1 up top
Old 08-28-06, 06:17 AM
  #2  
Full Member

 
adamtassell's Avatar
 
Join Date: Jun 2005
Location: Australia
Posts: 189
Likes: 0
Received 0 Likes on 0 Posts
With similar mods, but with the stock intercooler I made 350RWHP. I also had a cat.
Your car must be F#@ked
Old 08-28-06, 06:18 AM
  #3  
Full Member

 
adamtassell's Avatar
 
Join Date: Jun 2005
Location: Australia
Posts: 189
Likes: 0
Received 0 Likes on 0 Posts
Just Kidding I made 260, but with cat and stock cooler
Old 08-28-06, 02:58 PM
  #4  
Full Member

 
Dezigns's Avatar
 
Join Date: Oct 2004
Location: Aucks, NZ
Posts: 168
Likes: 0
Received 0 Likes on 0 Posts
Before my rebuild etc....

211rwkw @ 11psi.. torque performance (so a dyno dynamics dyno)

De-sequentialised (absolutely fscked) twins - as you'll see in the vid below
DIY twin intakes
stock downpipe
2.75" exhaust

http://www.ikirst.com/gallery/albums...o/Dezigns3.mpg
Old 08-31-06, 11:58 PM
  #5  
Junior Member

 
IBL17Z's Avatar
 
Join Date: Apr 2005
Location: Australia
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
i got 200rwkw @11psi on dyno dynamics

mods at the time:

blitz sus pods
blitz nur spec r cat back
pfc

motor is now getting rebuilt for more!!!
Old 09-09-06, 07:40 PM
  #6  
Senior Member

 
DMRH's Avatar
 
Join Date: Jan 2003
Location: Sydney, Australia
Posts: 587
Likes: 0
Received 1 Like on 1 Post
I spotted a series-8 with exhaust & boost controller doign 186rwKW on the RotorMaster dyno recently.

Dont know what boost it was set too but cant be too much as the ECU would have been stock.


REgards
Old 09-09-06, 08:27 PM
  #7  
Not the company

 
RE-Amemiya's Avatar
 
Join Date: Jul 2004
Location: United States
Posts: 5,040
Received 9 Likes on 8 Posts
When i had; Intake, downpipe, midpipe, pulley kit, and exhaust i made 283hp and 246lb/ft torque.

The intake is still there, but everything else is gone
Old 09-11-06, 02:12 AM
  #8  
Full Member

Thread Starter
 
kerry chandler's Avatar
 
Join Date: Oct 2004
Location: new zealand
Posts: 168
Likes: 0
Received 0 Likes on 0 Posts
whos good at tuning PFC on fds in the auckland area,I would have liked to go to torque performance but the guy said they dont really want to do rotaries anymore.
Anyone whose got a datalogit they wanna sell I'll be keen if the price is right.
also if somebodys got a wideband 02 they want to sell.Pm me if you have
something please.........I suppose 186 rwkw @9 psi is not a bad start
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Single Turbo RX-7's
0
08-14-15 04:48 PM



Quick Reply: anyone dynoed their twin turbo FD?



All times are GMT -5. The time now is 11:29 PM.