Adaptronic Trigger 3
11-21-14, 06:48 PM
#1
Full Member
Thread Starter
Trigger 3
Ok so I am having issues with spark. FD S8 plugin
So the ecu can make the coil spark using the ECU data page, But when cranking the trigger 3 is not flashing and there is no spark at the plug
all others are sparking. anyone got any ideas?? i don't really want to have to pull the harness
So the ecu can make the coil spark using the ECU data page, But when cranking the trigger 3 is not flashing and there is no spark at the plug
all others are sparking. anyone got any ideas?? i don't really want to have to pull the harness
11-23-14, 08:19 PM
#2
Full Member
Join Date: Sep 2013
Location: Philippines
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
Ok so I am having issues with spark. FD S8 plugin
So the ecu can make the coil spark using the ECU data page, But when cranking the trigger 3 is not flashing and there is no spark at the plug all others are sparking. anyone got any ideas?? i don't really want to have to pull the harness
So the ecu can make the coil spark using the ECU data page, But when cranking the trigger 3 is not flashing and there is no spark at the plug
all others are sparking. anyone got any ideas?? i don't really want to have to pull the harnessCan you please grab me a copy of your ECU file so I can check that on the bench first? Just do a File + Save as, then send the saved file to tech@adaptronic.com.au.
Thanks.
02-17-15, 04:33 AM
#3
Full Member
Thread Starter
Sorry Mark, I forgot all about this post. There was an issue with one of the trigger settings Wari fixed its self. I have how ever pulled the engine and harness its got low comp on the rear and I wasn't happy with it so havnt started it since.
Thread
Thread Starter
Forum
Replies
Last Post
windom
Adaptronic Engine Mgmt - AUS
4
09-11-15 04:48 AM
