No boost after ~4500 rpm
#1
No boost after ~4500 rpm
I understand this is not purely Adaptronic, but I am posting some logs so figure here is a good place to start. I have a stock port, stock intake, large exhaust setup running simplified sequential turbos and the Adaptronic Modular. Currently, everything is running pretty good, but when I get on the throttle boost goes up to about 8psi and then falls off any time I am above about 4500 rpm. Above 4500 rpm I am only about 5psi. No matter what I do in Eugene I can't get boost above the initial 8psi. I am posting three short logs of just 1st and 2nd gear pull to show what is happening. Any advice for what to check first is appreciated. Can't seem to upload the file, hopefully the link is sufficient, if not, please let me know how to post actual file.
Thanks
https://drive.google.com/file/d/1glj...ew?usp=sharing
https://drive.google.com/file/d/1bGI...ew?usp=sharing
https://drive.google.com/file/d/1ZjBSBEiOkbRe2hxfcJHbamZTP8ihHBQY/view?usp=sharing
Thanks
https://drive.google.com/file/d/1glj...ew?usp=sharing
https://drive.google.com/file/d/1bGI...ew?usp=sharing
https://drive.google.com/file/d/1ZjBSBEiOkbRe2hxfcJHbamZTP8ihHBQY/view?usp=sharing
Thread
Thread Starter
Forum
Replies
Last Post
SpecFC
2nd Generation Specific (1986-1992)
1
07-14-07 12:20 PM
M104-AMG
3rd Generation Specific (1993-2002)
14
08-03-05 09:59 AM
cruiser
3rd Generation Specific (1993-2002)
2
04-26-04 01:43 PM