Adaptronic Firmware Issue
#1
Semi P-PORT
Thread Starter
iTrader: (1)
Join Date: Feb 2010
Location: DC Metro Area
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Firmware Issue
Using WARI my Adaptronic select series 6 FD Twin Turbo ECU Data still says V10.122 (pressing F11) even though I've downloaded version 13.000. I've already uninstalled/ reinstalled WARI.
Serial number: CB-C36 2013-04-06 Firmware version: V10.122
The ECU itself physically states V10.000 and 2012-11-11.
Version 12 is now available thread, is where I started on this issue.
Serial number: CB-C36 2013-04-06 Firmware version: V10.122
The ECU itself physically states V10.000 and 2012-11-11.
Version 12 is now available thread, is where I started on this issue.
Last edited by bhop; 06-10-15 at 03:51 PM.
#2
Senior Member
iTrader: (13)
been a while since i did mine but i believe this is what i did
download and install the newest Wari and firmware
while connected to your ecu, in Wari you'll need to click firmware at the top and upgrade firmware
load the newest firmware from where you installed Wari
click verify and program.
download and install the newest Wari and firmware
while connected to your ecu, in Wari you'll need to click firmware at the top and upgrade firmware
load the newest firmware from where you installed Wari
click verify and program.
#4
Semi P-PORT
Thread Starter
iTrader: (1)
Join Date: Feb 2010
Location: DC Metro Area
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Hell yeah, you guys rock! I never clicked program, just verify and there were errors. This time, I loaded it, programed, then verified, lastly done. It worked and is now upgraded to Version 13.
Thank you
Thank you
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Shainiac
Single Turbo RX-7's
12
07-17-19 02:20 PM