Adaptronic Any update on the Modular release dates?
#27
Banned. I got OWNED!!!
I'm just excited to gather accelerometer/gyro information and put things together (with my own datalogging) like this for tuning purposes:
#29
Andy has worked out all the bugs as of yesterday. The first install did a 10.6 a few days ago at the local 1/4 mile, and made 504rwhp on a dynodynamics. Several others are about to hit the dyno too( currently road tuned).
We have our first FD PNP enroute to us.
We have our first FD PNP enroute to us.
#35
We have not tuned our car yet, we are swamped here( booked until next spring!).
Adaptronic has already dyno tuned the S6 Modular FD PNP FYI.
Our test car runs about 34 psi, so I have to take this slow to make sure things work out very well.
I will mention the Modular's faster processor already makes big difference in things like idle control, etc. It already runs much much better even on the same map. I do not know yet if you can just plug in a map from a select an run it on a modular unit, my gut is they should all be retuned.
Adaptronic has already dyno tuned the S6 Modular FD PNP FYI.
Our test car runs about 34 psi, so I have to take this slow to make sure things work out very well.
I will mention the Modular's faster processor already makes big difference in things like idle control, etc. It already runs much much better even on the same map. I do not know yet if you can just plug in a map from a select an run it on a modular unit, my gut is they should all be retuned.
#37
Sorry for the confusion, I just meant that certain things work a lot better...
I have confirmed that the background VE calcuations are different. So one should start from scratch tuning wise if you have a SELECT model, and are upgrading to a modular.
First thing I noticed is the VE maps look a lot more " correct ". Previously I only saw this on the piston motors.
I definitely plan on doing a a step by step setup/tuning video for the rotary cars. I had planned on this for quite some time, but wanted to hold off for the new ECUs...
I have confirmed that the background VE calcuations are different. So one should start from scratch tuning wise if you have a SELECT model, and are upgrading to a modular.
First thing I noticed is the VE maps look a lot more " correct ". Previously I only saw this on the piston motors.
I definitely plan on doing a a step by step setup/tuning video for the rotary cars. I had planned on this for quite some time, but wanted to hold off for the new ECUs...
#39
2SoonJr
iTrader: (8)
Join Date: Mar 2008
Location: OrangeCounty-Santa Ana
Posts: 525
Likes: 0
Received 5 Likes
on
4 Posts
Sorry for the confusion, I just meant that certain things work a lot better...
I have confirmed that the background VE calcuations are different. So one should start from scratch tuning wise if you have a SELECT model, and are upgrading to a modular.
First thing I noticed is the VE maps look a lot more " correct ". Previously I only saw this on the piston motors.
I definitely plan on doing a a step by step setup/tuning video for the rotary cars. I had planned on this for quite some time, but wanted to hold off for the new ECUs...
I have confirmed that the background VE calcuations are different. So one should start from scratch tuning wise if you have a SELECT model, and are upgrading to a modular.
First thing I noticed is the VE maps look a lot more " correct ". Previously I only saw this on the piston motors.
I definitely plan on doing a a step by step setup/tuning video for the rotary cars. I had planned on this for quite some time, but wanted to hold off for the new ECUs...
you sir are a //S A I N T// if you plan on doing a step by step video.
#41
LOL
I know a few things;
The 1st RB/300ZX PNP was installed and 100% successfully tuned at one of Adaptronic's Australian dealers.
The drive by wire modules are being worked on, 1st up is the implementation of the the Rx8 DBW throttle body.
I am pretty positive the FD PNP units are being assembled.
Andy just told me we are doing the PRI show again this December with a booth.
I am waiting on a response from an email this morning. I will let you guys know when the units are enroute.
I know a few things;
The 1st RB/300ZX PNP was installed and 100% successfully tuned at one of Adaptronic's Australian dealers.
The drive by wire modules are being worked on, 1st up is the implementation of the the Rx8 DBW throttle body.
I am pretty positive the FD PNP units are being assembled.
Andy just told me we are doing the PRI show again this December with a booth.
I am waiting on a response from an email this morning. I will let you guys know when the units are enroute.
#42
Senior Member
iTrader: (2)
Join Date: Sep 2007
Location: Germany
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
...i'm just wondering...
The Modular seems to be the better choice than the select series for an FD, but they are priced the same...
both are PNP, the modular seems to have some more options plus the better CPU... Is there any reason to pay the same price for a select ECU?
The Modular seems to be the better choice than the select series for an FD, but they are priced the same...
both are PNP, the modular seems to have some more options plus the better CPU... Is there any reason to pay the same price for a select ECU?
#46
REPU Garage
iTrader: (17)
Join Date: Jun 2007
Location: Northern Colorado
Posts: 623
Likes: 0
Received 0 Likes
on
0 Posts
Any ETA on when the Modular PnP ECU may be in stock?
Will there be a single turbo base map?
And will these be compatible with a hall trigger sensor such as the Full Function Engineering Hall trigger sensor or just the Mag sensor?
Thanks!
Will there be a single turbo base map?
And will these be compatible with a hall trigger sensor such as the Full Function Engineering Hall trigger sensor or just the Mag sensor?
Thanks!
#48
Rotary Enthusiast
iTrader: (3)
First units will be coming with a single turbo base map. I am pretty positive all the FFE trigger kits will work( coding was already done a long time ago for the select models). I will double check.
#49
Rotary Enthusiast
iTrader: (3)
Usually what we do is just add more fuel from 5 to 7.5k depending upon the porting.
Fuel curve follows the torque curve, so if you have tuned enough( or one could look at enough dyno sheets online) you can see the differences between these turbos( and where they will need more fuel).
#50
Andy is on the dyno today creating the FD Base Map.
Also incase you guys have not seen it the M6000 powered V1200 is up and running;
https://www.facebook.com/Adaptronic/?fref=ts
Also incase you guys have not seen it the M6000 powered V1200 is up and running;
https://www.facebook.com/Adaptronic/?fref=ts