won't idle below 1500
#1
Full Member
Thread Starter
Join Date: Jul 2002
Location: JAPAN
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
won't idle below 1500
I have tried everything but the idle will not go below 1500. I have tried adjusting the tps, no luck. I have double checked for vacuum leaks, None. I am starting to wonder if removing the purge control selonoid and double throttle is the problem. I safety wired the throttle body for the cold start, so that can't be it. I am in japan and it is hard to explain to a dealer what the problem is. As for what my car has: A tuned redom ecu(boost 1.0, 1.1 bar), full exhaust, down pipe, Fmic. Can some one please help me out. Or I am going to pay a *** load of money when it is probaly just some thing stupid. Thanks
#2
Maybe you are running a J-ported or small P-ported engine and dont' know it. :P
Sorry, just had to say something... consider it a favour as bumping your thread up to the top
Sorry, just had to say something... consider it a favour as bumping your thread up to the top
#4
Full Member
Thread Starter
Join Date: Jul 2002
Location: JAPAN
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
My motor is street ported. I removed the coolant line that runs to the throttle body, therefore I had to safety wire the cold start open. Or the car would always think it is cold, and idle high.
Thread
Thread Starter
Forum
Replies
Last Post
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM