Wiring Harness plugs
#1
Full Member
Thread Starter
Join Date: Sep 2004
Location: Misawa, Japan
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Wiring Harness plugs
Well like I said last time, I just installed my freshly rebuilt engine, with single turbo setup and im not getting any fuel. My friend and I followed what one of the members did, who was having the same problem. We know the injectors are getting 12v, and that the wires are not broken on the injectors and CAS. We are thinking its the ECU, but before going all crazy since this is the first time we are woprking on an FD, we were wondering if we hooked up all the connectors we needed. I bought the block off plate from RX7store, and plugged up everything I need I think. Or do ECUs just go bad since the car was running before I ripped out the engine. I will be getting a PFC next payday, and installing my 1600cc's, I just wanted to see if the car would idle with the stock stuff. Any help would be highly appreciated.
Thread
Thread Starter
Forum
Replies
Last Post