wires from engine bay to interior by passenger side???
03-17-02, 10:07 AM
#1
canadian monster
Thread Starter
iTrader: (2)
Join Date: Mar 2001
Location: Trois-Rivières, Qc, Can
Posts: 2,083
Likes: 0
Received 0 Likes
on
0 Posts
wires from engine bay to interior by passenger side???
Anybody know how to make that? I know where to pass on the driver side but i can't seem to pass my hand behind the ABS unit. How do you guys pass wires through the firewall on that side of the car?
thanks a lot
puma
thanks a lot
puma
03-17-02, 10:20 AM
#2
Senior Member
Join Date: May 2001
Location: Campbell River, BC, Canada
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
Hi Puma, I poked a hole through the Wiring harness gromet for the ECU. I loosened the 10mm nuts holding the ABS down and then slipped out the heat shield, you can then get your hand in there. I also put a little silicon caulking on the wire where it passes through to reseal the hole especially if you have more than one wire. It isn't the easiest thing to do but what the hell.
