Wiper trouble!
#1
The Spirit of FLUFF!
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: East Highland, CA
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
Wiper trouble!
I was driving home today and my wipers were working fine until all of a sudden for no reason they stopped in the middle of the windshield........I was like oooooook. So I pulled into a gas station for a little bit to check the fuses and such since I always have extras with me. The problem was that I checked the wiper fuse, both front and back, and they were fineż? Are the wipers tied in with any other fuses at all? So I'm stumped, is there a relay for the wipers that im missing under the hood? So if someone could help me fix this that would be great, thanks.
#3
Banned. I got OWNED!!!
Join Date: Jul 2004
Location: next to the polishing wheel!!!
Posts: 1,179
Likes: 0
Received 1 Like
on
1 Post
Check the brushes in the motor .If they are worn out you can make new ones by filing or sanding a set for another motor . The dealer does not supply new ones .I made mine from a set from Advanced Auto .
#5
Rotary Freak
iTrader: (173)
if you have power at the plug of the wiper motor with the ignition on and wiper switch on.(check with test light). check for a bad ground before you change the wiper motor.get a peice of wire and touch the motor housing to a good ground while the ignition and the wiper switch is on and see if the wipers work.hope this helps you.i have seen this happen before.
Thread
Thread Starter
Forum
Replies
Last Post
FC3S Timmy
2nd Generation Specific (1986-1992)
16
10-03-15 01:08 AM
Red-Dragon_Akuma
New Member RX-7 Technical
11
09-28-15 06:09 AM