Will Apexi intake work w/Greddy FMIC?
Thread Starter
STi Boxer power!
Joined: Apr 2001
Posts: 2,160
Likes: 0
From: Austin, TX
Will Apexi intake work w/Greddy FMIC?
I will be picking up a Greddy 2-Row FMIC this spring and trying to decide on an intake to use. I really don't care for the Greddy intake much and would prefer to use the Apexi, but I have heard they don't work together? Anyone using this combo? If so, what's involved with making them work together? Thanks much!
Bryan
Bryan
http://flathat.woodstream.net/RX7/Greddy_FMIC_Install/
Originally posted by nocab72
I did not have to modify the actual Apexi intakes, I did however do some customization on the piping to get the apexi intakes to "sit" in acceptable spots.
1) top intake, I cut the stock intake hose (plastic) just behind the flexiable portion of it then attached one of the apexi intakes directly which moved the intake "back" (basically shortened it by about 6 - 8").
2) the bottom intake I used a 2 1/2" 180 degree elbow from home depot (which I later painted black and was not even noticable). One end of the elbow went over
the turbo intake, the other directly to the second apexi intake.
You can see both (unpainted 180" elbow and shortened stock intake hose) in this picture here along with vented BOV.
http://flathat.woodstream.net/RX7/Gr...l/P5120097.JPG
I did not have to modify the actual Apexi intakes, I did however do some customization on the piping to get the apexi intakes to "sit" in acceptable spots.
1) top intake, I cut the stock intake hose (plastic) just behind the flexiable portion of it then attached one of the apexi intakes directly which moved the intake "back" (basically shortened it by about 6 - 8").
2) the bottom intake I used a 2 1/2" 180 degree elbow from home depot (which I later painted black and was not even noticable). One end of the elbow went over
the turbo intake, the other directly to the second apexi intake.
You can see both (unpainted 180" elbow and shortened stock intake hose) in this picture here along with vented BOV.
http://flathat.woodstream.net/RX7/Gr...l/P5120097.JPG
Thread Starter
STi Boxer power!
Joined: Apr 2001
Posts: 2,160
Likes: 0
From: Austin, TX
I wonder what the modifications all involve? Any ideas? The site Mahjik listed is great for install steps and pics but doesnt really say what he had to do to get it to work with the Greddy FMIC.
Originally posted by bricke
I wonder what the modifications all involve? Any ideas? The site Mahjik listed is great for install steps and pics but doesnt really say what he had to do to get it to work with the Greddy FMIC.
I wonder what the modifications all involve? Any ideas? The site Mahjik listed is great for install steps and pics but doesnt really say what he had to do to get it to work with the Greddy FMIC.
I posted nocab72's message on exactly what he did to adjust the Apexi intake.
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
Mar 17, 2022 02:46 PM
immanuel__7
2nd Generation Specific (1986-1992)
89
Sep 5, 2015 10:23 AM
