wideband placement
#1
Senior Member
Thread Starter
Join Date: Oct 2005
Location: charlotte, nc
Posts: 693
Likes: 0
Received 0 Likes
on
0 Posts
wideband placement
i just purchased an AEM Uego wideband controller gauge. i used one on my 11 second evo and i swear by them now. but i was wondering about 02 bung placement in the downpipe. these are heated bosch sensors and on piston engines must be placed around 1.5 to 2 feet away from the turbo. but the rotary runs much hotter, so i was wondering the concensus of o2 sensor placement. how far away on a 2 rotor from the turbos should it be placed so it doesnt over heat, or destroy it? im thinking around 3-4 feet away, or just before the mid pipe. of course on top of the pipe for moisture reasons. Discuss...
#3
Senior Member
Thread Starter
Join Date: Oct 2005
Location: charlotte, nc
Posts: 693
Likes: 0
Received 0 Likes
on
0 Posts
thats what i was thinking. that is much further back than that other type of motor... i forget what they call it.
Last edited by rt turbo; 01-26-06 at 10:40 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM