Whoosh sound after changing coolant?
05-17-03, 05:57 PM
#1
Below- "Esses" at RA
Thread Starter
Join Date: Dec 2001
Location: Tampa Bay, FL area.....
Posts: 634
Likes: 0
Received 0 Likes
on
0 Posts
Whoosh sound after changing coolant?
I remember reading about this some time ago, but can't find anything on it when searching.
Just changed out my coolant, added water wetter, etc.............now I've got a whooshing sound when you blip the throttle.............sort of a gurgling/whooshing sound that sounds like it comes from the glove box.
Is there a quick cure or is this just air in the system that will eventually work itself out through the AST or whatever.............
Thanks.
David
Just changed out my coolant, added water wetter, etc.............now I've got a whooshing sound when you blip the throttle.............sort of a gurgling/whooshing sound that sounds like it comes from the glove box.
Is there a quick cure or is this just air in the system that will eventually work itself out through the AST or whatever.............
Thanks.
David
05-17-03, 06:17 PM
#2
Rotary Enthusiast
Join Date: Aug 2001
Location: Waiting for Indykid to catch up
Posts: 1,236
Likes: 0
Received 1 Like
on
1 Post
If you have an AST, it should work its way out. What you are hearing is air trapped in the heater core. If it doesn't stop after a while, then bleed the system.
Thread
Thread Starter
Forum
Replies
Last Post
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM
The1Sun
1st Generation Specific (1979-1985)
0
09-07-15 10:21 PM
ZaqAtaq
New Member RX-7 Technical
2
09-05-15 08:57 PM
83revival
New Member RX-7 Technical
4
09-03-15 10:42 PM
