who makes good 3mm seal kit
01-09-02, 10:56 AM
#1
Junior Member
Thread Starter
Join Date: Nov 2001
Location: ft. lauderdale fl
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
who makes good 3mm seal kit
i am getting ready to rebuild my 3rd gen tt and gonna make it single turbo w/ street proted motor 3mm seals and extra pins in the back plate...... but i need to know who makes a good 3mm seal kit that can take 500hp and a daily driver??? good question right.. if anyone knows please email me at
MTJNR@AOL.COM
please give the name brand, where i can buy, and how much they are.. everyons help would be much appreciated.
mile
mike
MTJNR@AOL.COM
please give the name brand, where i can buy, and how much they are.. everyons help would be much appreciated.
mile
mike
01-09-02, 11:57 AM
#2
Cut and pasted from Mazda Motorsports site:
0000-01-9115 C SEAL, APEX - IANETTI CERAMIC 13B/2pc/3mm 2 ALL RX 13B ALL $985.20
Notes: 2 Piece, 3mm. Ceramic apex seals use a two spring design for higher spring pressure to improve chamber sealing, and provide the following benefits: Exceptional sealing characteristics at all temperatures, Low Friction, Low Weight, Show little to no wear, Can withstand damaging engine detonation better than any stock or carbon seal, and will not absorb moisture when engine is stored. Well worth every penny. Includes precut springs. Only sold in sets of three. SOLD AND PRICED THREE AT A TIME. QTY 2 = 6 SEALS.
0000-01-9115 C SEAL, APEX - IANETTI CERAMIC 13B/2pc/3mm 2 ALL RX 13B ALL $985.20
Notes: 2 Piece, 3mm. Ceramic apex seals use a two spring design for higher spring pressure to improve chamber sealing, and provide the following benefits: Exceptional sealing characteristics at all temperatures, Low Friction, Low Weight, Show little to no wear, Can withstand damaging engine detonation better than any stock or carbon seal, and will not absorb moisture when engine is stored. Well worth every penny. Includes precut springs. Only sold in sets of three. SOLD AND PRICED THREE AT A TIME. QTY 2 = 6 SEALS.
01-09-02, 01:52 PM
#3
WTB** Very Low Miles 94-95
Join Date: Jul 2001
Location: Tejas
Posts: 3,298
Likes: 0
Received 0 Likes
on
0 Posts
nice
nicely done toad man
I have those same seals in now....well I have the one piece set (supposed to handle high rpm abuse)...still waiting on the m2turbos....will be making the final arrangements on the 15th...the car will be on the road by the first at the latest. Ill let you all know how the seals work out..as well as the new mods. 400hp here i come!
j
I have those same seals in now....well I have the one piece set (supposed to handle high rpm abuse)...still waiting on the m2turbos....will be making the final arrangements on the 15th...the car will be on the road by the first at the latest. Ill let you all know how the seals work out..as well as the new mods. 400hp here i come!
j
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM
