Where to get steelbraided fuel hose set for FD!
10-26-02, 08:37 PM
#1
Full Member
Thread Starter
Join Date: May 2002
Location: Denver
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Where to get steelbraided fuel hose set for FD!
Does any company make a set for the fd. I want every single fuel line begining at the fuel rail all the way back to the fuel filter. Is this possible? where can I find this stuff? how much is is usually? Thanks.
10-26-02, 08:43 PM
#2
1993 RX7 R1
Join Date: Jul 2001
Location: SoCal
Posts: 1,266
Likes: 0
Received 0 Likes
on
0 Posts
Nobody makes anything like that for the FD3S.
You will have to fabricate your own.
The parts cost will be over $200(This is based on parts cost of about $100 for replacing the fuel lines in the engine bay only)
Summit Racing has good prices on Earl's parts which are the best in my opinion.
You will have to fabricate your own.
The parts cost will be over $200(This is based on parts cost of about $100 for replacing the fuel lines in the engine bay only)
Summit Racing has good prices on Earl's parts which are the best in my opinion.
10-26-02, 08:46 PM
#3
I'm a CF and poop smith
I think the price is a bit over 300 bucks for parts from summit racing for the steelbraided fuel hose parts. When you are doing this, you should relocate the fuel filter too while are at it.
Good luck
Good luck
10-26-02, 09:35 PM
#4
Lives on the Forum
no kits. make your own.
i like russell fittings better. just connect with less fraying of the braid imo. i have used earl's, russell's, and aeroquip fittings and find russells to be my choice.
in my fuel system i am close to $1000 for my FD. but that includes a sump and pump.
i like russell fittings better. just connect with less fraying of the braid imo. i have used earl's, russell's, and aeroquip fittings and find russells to be my choice.
in my fuel system i am close to $1000 for my FD. but that includes a sump and pump.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM