where can I find tutorial on venting stock BOV?!?! please help!
09-29-02, 11:00 PM
#3
Full Member
Join Date: Feb 2001
Location: So farrrr away from the Land of the Rising Sun
Posts: 105
Likes: 0
Received 1 Like
on
1 Post
1. Get a shop manual or DL the PDFs
after disconnecting the bottom hose as mentioned earlier, you may want to cap the hose on the stock intake box with a table leg foot made of rubber available at any hardware store. That works well.
-Kib
after disconnecting the bottom hose as mentioned earlier, you may want to cap the hose on the stock intake box with a table leg foot made of rubber available at any hardware store. That works well.
-Kib
09-29-02, 11:03 PM
#4
5yr member, joined 2001
You can:
A) click the link
or
B) click back and then CLICK THE THREAD ENTITLED "Venting BOV..."
https://www.rx7club.com/forum/showth...hreadid=118780
A) click the link
or
B) click back and then CLICK THE THREAD ENTITLED "Venting BOV..."
https://www.rx7club.com/forum/showth...hreadid=118780
09-30-02, 07:45 AM
#6
I'm a CF and poop smith
JONSKI write up is the best i think, its pretty much moron proof since its got the pics of the actually parts right there in front of you. Again, GJ on the write up, perhaps it should become a sticky, I have seen about 3-4 threads about this same subject in the past week.
