what vacume lines to take out?
Thread Starter
Full Member
Joined: Nov 2003
Posts: 228
Likes: 0
From: virginia
what vacume lines to take out?
Rx7 member,
I am going to swap injectors in my 95 RX7 and wanted to know what vacume lines i can take out. I do not care about emmission and also tihnking about taking out stock twins for single turbo. Can I take out whole rats nest or do i need to keep some of them in there?
Current project. Please add here if I can do other work while I ahve UIM off the car.
1. new injectors
2. remove DT (IS DT acutator part of this unit? if it is can i disconnect the vacume line going to sensor?
I also have front bumper and intercooler off the car.
thx
I am going to swap injectors in my 95 RX7 and wanted to know what vacume lines i can take out. I do not care about emmission and also tihnking about taking out stock twins for single turbo. Can I take out whole rats nest or do i need to keep some of them in there?
Current project. Please add here if I can do other work while I ahve UIM off the car.
1. new injectors
2. remove DT (IS DT acutator part of this unit? if it is can i disconnect the vacume line going to sensor?
I also have front bumper and intercooler off the car.
thx
Joined: May 2005
Posts: 3,243
Likes: 42
From: Kennewick, Washington
Did a Search for "vacuum simplification"
https://www.rx7club.com/showthread.p...simplification
https://www.rx7club.com/showthread.p...simplification
https://www.rx7club.com/showthread.p...simplification
Lots of good info in these threads.
https://www.rx7club.com/showthread.p...simplification
https://www.rx7club.com/showthread.p...simplification
https://www.rx7club.com/showthread.p...simplification
Lots of good info in these threads.
still 1.3 liter v8 eater
Joined: Sep 2006
Posts: 546
Likes: 0
From: San Diego, CA
Originally Posted by Realv8huntr
Rx7 member,
I am going to swap injectors in my 95 RX7 and wanted to know what vacume lines i can take out. I do not care about emmission and also tihnking about taking out stock twins for single turbo. Can I take out whole rats nest or do i need to keep some of them in there?
Current project. Please add here if I can do other work while I ahve UIM off the car.
1. new injectors
2. remove DT (IS DT acutator part of this unit? if it is can i disconnect the vacume line going to sensor?
I also have front bumper and intercooler off the car.
thx
I am going to swap injectors in my 95 RX7 and wanted to know what vacume lines i can take out. I do not care about emmission and also tihnking about taking out stock twins for single turbo. Can I take out whole rats nest or do i need to keep some of them in there?
Current project. Please add here if I can do other work while I ahve UIM off the car.
1. new injectors
2. remove DT (IS DT acutator part of this unit? if it is can i disconnect the vacume line going to sensor?
I also have front bumper and intercooler off the car.
thx
Thread
Thread Starter
Forum
Replies
Last Post
BLK 93
3rd Generation Specific (1993-2002)
11
Sep 9, 2015 10:56 AM
Tem120
3rd Generation Specific (1993-2002)
4
Sep 7, 2015 09:53 AM
Nosferatu
2nd Generation Specific (1986-1992)
7
Sep 5, 2015 02:13 PM