What size bearings should I buy?
#1
Senior Member
Thread Starter
Join Date: Jun 2005
Location: Indiana
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
What size bearings should I buy?
Need to purchase new stat gear bearings... Need help in sizing..
Here is tech details:
Eshaft measures:
Inner: 42.974 mm
Outer: 42.949 mm
Standard clearance inner: 0.06-0.08mm
Standard clearance outer: 0.08-0.11mm
It looks like the inner bearing diameter drives the selection according to the manual.
Stack up Inner w/ Tolerance: 43.034~43.054
Stack up Outer w/ Tolerance: 43.029~43.059
The parts fisch only shows bearing thicknesses from 1.980mm to 2.000mm
What is stock?
Here is tech details:
Eshaft measures:
Inner: 42.974 mm
Outer: 42.949 mm
Standard clearance inner: 0.06-0.08mm
Standard clearance outer: 0.08-0.11mm
It looks like the inner bearing diameter drives the selection according to the manual.
Stack up Inner w/ Tolerance: 43.034~43.054
Stack up Outer w/ Tolerance: 43.029~43.059
The parts fisch only shows bearing thicknesses from 1.980mm to 2.000mm
What is stock?
#2
Rotary Enthusiast
iTrader: (31)
I had the same question before, and if you look at the different size bearing. From the max to the min its only 0.02 mm. I asked Dave from atkins, and he told me he just stocks the biggest bearing, meaning the bearing with the largest clearance.
hope that makes sense
hope that makes sense
Last edited by HAI-TEK7; 04-11-06 at 01:46 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM