what is my problem?
07-02-02, 12:45 AM
#1
Senior Member
Thread Starter
Join Date: Feb 2002
Location: Vancouver, Canada
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
what is my problem?
ok the boost on my PFC is set at 0.85kg/cm^2
i was getting 12-5-12, now its even worse, its like
9-5-9.
i have done a silicone hose job a while back so i dont think ne thing is leaking from there. at WOT i hear air (whoosh) coming near the glove box while im driving. checked all my intercooler/intake pipes and its all tight. ne ideas where my boost is leaking from?
i was getting 12-5-12, now its even worse, its like
9-5-9.
i have done a silicone hose job a while back so i dont think ne thing is leaking from there. at WOT i hear air (whoosh) coming near the glove box while im driving. checked all my intercooler/intake pipes and its all tight. ne ideas where my boost is leaking from?
07-02-02, 07:34 AM
#3
Full Member
Join Date: Jul 2001
Location: MA
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
Check tightness of all boost clamps.
If you are still running the stock y-pipe take off the rubber coupler between the y-pipe and crossover tube. Bend sharply as though you are trying to turn it inside out and look for cracks. If cracked replace or switch to an efini y-pipe (no rubber coupler).
If you are still running the stock y-pipe take off the rubber coupler between the y-pipe and crossover tube. Bend sharply as though you are trying to turn it inside out and look for cracks. If cracked replace or switch to an efini y-pipe (no rubber coupler).
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM