Ok, I don't remember what the button says exactly but it's by the emergency brake, and it's red. I know it's related to cooling something or another. Could you please tell me what its for and what it does?
Thanx

 

It sounds like you might be referring to the exhaust system overheat display. It is just a light (not a switch) that goes on when the temp at a point on the floor above the exhaust system gets too high. Is this what you are asking about?

 

Exactly!, that's what I meant. So how does it relieve all that heat? does it channel the exhaust gases through some other place? Thanks so much maxcooper, I couldn't remember what that light was?

 

The indicator doesn't DO anything, other than to tell you your exhaust system is too hot. This means take action NOW!

 

It is a warning light. It lets you know if its getting too hot under the passenger side floor. I've heard that it is a good indicator of a clogged cat. And I believe that the PFC will also activate the light for some reason which I don't remember right now.

 

Basicly from what I know, when the light comes on, it's telling you the cat is really hot, and the air pump is being used to cool it down.

 

Doesnt the airpump pump in air to increase the heat and allow a more complete combustion to occur?

Anyways, it is a bad sign if it comes on.


the_saint

 

Basically it comes on to tell you that the passenger carpet is about to BURST INTO FLAMES

 

Its an Eject button!