Went Full Non-Sequential - Boost Pills
06-30-06, 02:29 AM
#1
Full Member
Thread Starter
Join Date: May 2006
Location: MA
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
Went Full Non-Sequential - Boost Pills
Hey, so i jsut finished, well almost, my convert to full non-seq. I have a manual boost controler, thats all thats left to install. I have the lines run, one from the wastegate actuator, and one from the turbo elbow. Now, i know stock there is a pill in the line that the boost control goes on, do i still need the pill with the controler? and if so, where can i get one. thanks 
06-30-06, 09:42 AM
#2
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,899
Likes: 0
Received 118 Likes
on
68 Posts
The pill was just a fine tune for the boost controll system which you are replacing now.
No pill needed as your manual replaces it all, but if you have problems with you manual then you might add back in a pill and experiment with it's size.
Many people buy a fuel get for a carb like a Weber or Holley.
No pill needed as your manual replaces it all, but if you have problems with you manual then you might add back in a pill and experiment with it's size.
Many people buy a fuel get for a carb like a Weber or Holley.
Last edited by cewrx7r1; 06-30-06 at 09:44 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM