Weird Boost transition!!
#1
Full Member
Thread Starter
Join Date: Mar 2001
Location: IL
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Weird Boost transition!!
When in 2nd gear I have full boost on both Primary and Secondary but during transition it would dip down to around 5 PSI. However, when in 3rd gear I get full boost on both PRi and Sec and also the transition is perfect...just dip briefly down to 9/10 PSI.
So basicly, the boost is fine throughout the powerband with only the low drop to 5PSI while transition to 2ndary turbo on 2nd gear.
Any ideas or anyone experience this before?
Thanks.
So basicly, the boost is fine throughout the powerband with only the low drop to 5PSI while transition to 2ndary turbo on 2nd gear.
Any ideas or anyone experience this before?
Thanks.
#2
Passenger
Posts: n/a
get rid of seq it just does wierd **** go non-seq and never worry about boost issues again...
here is a how-to
www.dontbearikki.com
-Ryan
here is a how-to
www.dontbearikki.com
-Ryan
#4
Senior Member
iTrader: (3)
Join Date: Aug 2001
Location: Medford, OR
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
What are your mods? I am experiencing similar problems with my car with DP, CB, Intake, SMIC, and M2 stage 3 reprogrammed ecu.
Basically, there is no way to eliminate this problem with a stock or reprogrammed ecu. I have messed with the waste gate and precontrol pills until I am blue in the face. I am thinking about going to the Power FC.
Good luck,
Jeff
Basically, there is no way to eliminate this problem with a stock or reprogrammed ecu. I have messed with the waste gate and precontrol pills until I am blue in the face. I am thinking about going to the Power FC.
Good luck,
Jeff
#5
Full Member
Thread Starter
Join Date: Mar 2001
Location: IL
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Yes, that's stock...I am running slightly higher in boost.
It's only dipping that low on 2nd gear but it's fine in other gears.
It's only dipping that low on 2nd gear but it's fine in other gears.
Originally posted by ttpowerd
should only dip to about 8psi on a stock ecu
should only dip to about 8psi on a stock ecu
#6
Full Member
Thread Starter
Join Date: Mar 2001
Location: IL
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Hey, I don't have stock ECU, I have PMS with most of the bolt on stuff. Do you have this problem with all gears or just on 2nd like me?
IM me if you're on AIM: surpernsx
Thanks.
IM me if you're on AIM: surpernsx
Thanks.
Originally posted by aReX-7
What are your mods? I am experiencing similar problems with my car with DP, CB, Intake, SMIC, and M2 stage 3 reprogrammed ecu.
Basically, there is no way to eliminate this problem with a stock or reprogrammed ecu. I have messed with the waste gate and precontrol pills until I am blue in the face. I am thinking about going to the Power FC.
Good luck,
Jeff
What are your mods? I am experiencing similar problems with my car with DP, CB, Intake, SMIC, and M2 stage 3 reprogrammed ecu.
Basically, there is no way to eliminate this problem with a stock or reprogrammed ecu. I have messed with the waste gate and precontrol pills until I am blue in the face. I am thinking about going to the Power FC.
Good luck,
Jeff
Last edited by rx7tturbo; 06-07-02 at 10:35 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
ZaqAtaq
New Member RX-7 Technical
2
09-05-15 08:57 PM