is there a way of removing the part where the water pump is bolted onto as i have snapped the two small bolts on it and need to re thread them diagram would be very help full as its seems to be not attached to the engine as such


also where is the cheapest place to get water pump from


thanks

g

 

the housing the water pump attaches to can be removed. Not too difficult but the oil meter lines that run around have very little slack on them so it makes it a little difficult.

 

mazda dealer, but make sure you get just what you need, a lot of parts books will sell you the pump, houseing etc, etc.. if you just need the pump, make sure you just get the pump, and don't let them BS you that that's how the part comes....

 

how much is a pumo over state side as here in the uk are around $500 for jut the pump