Wastegate and Precontrol Solenoid Help
07-06-08, 03:36 PM
#1
It's dark like Poe.
Thread Starter
Wastegate and Precontrol Solenoid Help
Two questions:
What are the part numbers on these solenoids, and do they work interchangably? I think the wastegate solenoid is toast, but I want to be sure before I order from Ray.
It says N3A1 3Z07 on top, but I ran that number through Mazdatrix's full price list and nothing came up. I figure this is a part they'd carry...
What are the part numbers on these solenoids, and do they work interchangably? I think the wastegate solenoid is toast, but I want to be sure before I order from Ray.
It says N3A1 3Z07 on top, but I ran that number through Mazdatrix's full price list and nothing came up. I figure this is a part they'd carry...
07-06-08, 03:47 PM
#2
You can't order them separately, but they should work the same. They come as pictured riveted to the bracket. I take them apart to clean up the engine bay on non-sequential cars, so I may have one or two laying around if you don't want to purchase the whole assembly.
07-06-08, 04:02 PM
#3
It's dark like Poe.
Thread Starter
That'd be great. Please let me know if you have a couple. Heck, I'll take as many as you have, unless there's some way to see that these things are working properly...
I get 7-5-7 with or without the wastegate side plugged into the harness, so I think that's at least part of the problem. I figure if I switch the harness clips and the vacuum lines, maybe I'll lose precontrol, but I'll get back my 10psi on the primary. I don't know. Just experimenting.
I get 7-5-7 with or without the wastegate side plugged into the harness, so I think that's at least part of the problem. I figure if I switch the harness clips and the vacuum lines, maybe I'll lose precontrol, but I'll get back my 10psi on the primary. I don't know. Just experimenting.
