Wanted: CWR Oil cooler install instructions
01-30-07, 08:18 PM
#1
Wanted: CWR Oil cooler install instructions
I recently bought a used Crooked Willow Racing Oil cooler setup.
The one thing I would like to see from the instructions is the exact mounting location for the hangers.
If it weren't for the CF ducts, it probably wouldn't matter too much, but I would like to avoid a lot of trial and error, and get the ducts to line up with the bumper on the first try if possible.
So, if any of you still have those lying around somewhere...
The one thing I would like to see from the instructions is the exact mounting location for the hangers.
If it weren't for the CF ducts, it probably wouldn't matter too much, but I would like to avoid a lot of trial and error, and get the ducts to line up with the bumper on the first try if possible.
So, if any of you still have those lying around somewhere...
01-30-07, 08:42 PM
#2
Rotary Poseur
Join Date: Feb 2001
Location: Richmond, BC, Canada
Posts: 718
Likes: 0
Received 0 Likes
on
0 Posts
Saved this from Duane's site from eons back...no pix tho. Check FD3S.net for pix: http://www.fd3s.net/oil_cooler_install.html
01-30-07, 08:47 PM
#3
Originally Posted by HedgeHog
Saved this from Duane's site from eons back...no pix tho. Check FD3S.net for pix: http://www.fd3s.net/oil_cooler_install.html
Thread
Thread Starter
Forum
Replies
Last Post