Hello all. For the pas few months I have been trying to build 1 fd out of 3 of them that I own now. I took the drivetrain from one that was in a rollover but still started right up, took the front frame off of another and am now finishing up the touches in my freinkentein rx7. I appreciate your help and advice. I am going to purchase a new switch today and am also goin to try to jump the security system that. Found in a different thread that might help.

http://www.youtube.com/watch?v=XXCKQ...e_gdata_player

 

So I have fuel but no spark. I have no idea where to start....

 

If it was theft deterrent I don't think it would turn over as I believe that it breaks the starter circuit, at least this is my assumption based on my FCs that I had. Assume the FD is similar. If no spark, I would see if there is B+ at the coils. If N work back from there and check wiring and components such as all connectors, power dist relays, ign switch, etc. Since you've pieced together a car can't take anything for granted like a connector that may have been overlooked.

 

Where is the connection to the coil pack? Do I have to remove anything to get access to test it with the multimeter? Do you know which wires to test?