So finally after a year and a month after the accident and dealing with the god damn insurance company, my new halfbridge T78 is alive and home. Its extremely untuned and steve kan is tuning it this weekend. Stay posted for dyno results!!
There are 2 vids of it warming up and after warm. Since its untuned it stinks of fuel badly. Thanks to the Rx7 store(Jason and Zavior) for the engine. The car builds about 10psi at 3k RPM!!!!!!!

Warmup:
http://videos.streetfire.net/video/3...5d00fa131f.htm

Warm Idle:
http://videos.streetfire.net/video/2...5d00fb5a5d.htm

 

Where is the vid?

 

*staying tuned for dyno results*

i guess i need to call my insurance co after i "accidently" set my motor on fire so i can get my T-78 i'm j/k

 

vids are optimizing.....

 

says "cannot open file"

 

mm makes me wanna go half bridge

 

god damn..still optimizing. ptrhahn, just click the link dont try and save it.

 

I've been very interested in a 1/2 bridge but I was told by my builder that a large street port is better. I thought the 1/2 bridge only affected the top end but he says it screws up the idle and I forget but sounded like the opposite of what I thought. I tried to ask Judge Ito but I don't think he's around any more. Does you 1/2 bridge go all teh way down? any pics of it? what are your results and how do you like it? errr, how many hows does the optimize take?

 

vids are optimizing.....still....................

 

I think street fire is down for vids or something. It does idle at 1500rpm and it sounds like its cam'ed out. The half bridge(according to steve kan) helps low and mid range, and top end is like a large race port. My turbo does spool MUCH faster with the 1/2 bridge port, i get around 10psi at 3000rpm with a T78 and a greddy 3 row. I think it sounds cool, but i would not do it for a daily driver.

 

what hotside do you have on the T78?

 

nice.. brap brap brap.. what exhaust? msn yo *** negro!

 

nice sound....get to start enjoying the fd again....
and another fd getting tuned by steve kan....(where is his shop at, or does he just travel al the time)

 

Gotham Racing, HaltomCity, TX. In between Dallas and Ft. Worth. Awesome one stop shop.

 

little to far for me....think ill go see jason at rx7store, when im ready....

 

omg! i cant wait till i get mine! vids worked fine for me

 

iceman what size and offset are those fn01r-c wheels in the front?

 

The offset is 35. I think im going to upgrade the rims. they are 17x8 and 17x9. I want 18x9 and 18x10

 

I have 18x9.5 and 18x10.5 on both my FD's they fit great but you have to roll your front fenders.

The bridge sounds great. How much you looking to make at the wheels?

 

Nice!

 

BadAss!!!

 

From what i have seen and after talking to kan, we should be able to make 530+rwp at about 18-19psi on pump with water/alky injection

 

Nice

 

Greddy exhaust

 

Not bad, I expected alot more brappyness though. Dang, idles a wee bit high. How does the high idle affect temps in traffic (bumper/bumper, stop/go)?