vacuum lines..?
#1
Junior Member
Thread Starter
Join Date: Sep 2003
Location: Santa Cruz CA
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
vacuum lines..?
I am looking to change out the vacuum lines in my 13B-REW
I have found tons of stuff all over the internet about the swap my question is can I use 3mm vacuum hose or do I really need to find 4mm
I have about 30 ft of 3mm lay'n around that is why i ask
please let me know
thanks
I have found tons of stuff all over the internet about the swap my question is can I use 3mm vacuum hose or do I really need to find 4mm
I have about 30 ft of 3mm lay'n around that is why i ask
please let me know
thanks
#4
The Power of 1.3
Join Date: Aug 2001
Location: Shrewsbury, Massachusetts
Posts: 2,837
Likes: 0
Received 0 Likes
on
0 Posts
Check here for all your hosing needs http://66.216.67.51/product.asp?0=209&1=343&3=633
(You're welcome Jason)
(You're welcome Jason)
#5
Eats, Sleeps, Dreams Rotary
iTrader: (4)
Join Date: Apr 2003
Location: Denver, NC
Posts: 3,531
Likes: 0
Received 0 Likes
on
0 Posts
do one at a time so you don't CAUSE any other issues withthe system. it takes some time but you get to know your car so thats a good thing! Have fun. If it's never been off before(even if it has) The UIM gasket is like around 10 bucks.(metal gasket) replace that while you have it off. stick rags/paper towels in the holes that are open so bolts don't fall in! This sucks!!! Trust me!Good luck.
#6
Junior Member
Thread Starter
Join Date: Sep 2003
Location: Santa Cruz CA
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Ok
so what i am getting out of this is that the hose sizes are spacific
and that you can't use a 3mm hose where there is a 3.5
and so on
anyway
thanks for the replys
so what i am getting out of this is that the hose sizes are spacific
and that you can't use a 3mm hose where there is a 3.5
and so on
anyway
thanks for the replys
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM