3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

vacuum leak? boosts a solid 8 when boost controller off

Thread Tools
 
Search this Thread
 
Old 08-17-04, 01:39 PM
  #1  
Senior Member

Thread Starter
 
Androidmj's Avatar
 
Join Date: Oct 2003
Location: Rochester, NY
Posts: 313
Likes: 0
Received 1 Like on 1 Post
vacuum leak? boosts a solid 8 when boost controller off

when i shut my boost controller off, i get a solid 8 boost. Both my autometer gauge and my profec b show 8psi. Also, my car sometimes idles at 17-18in vacuum, and other times (especially after a hard run) idles at 14. Anyone know why this would be, or where would be the best place to search for a vacuum leak, i already pulled my UIM yesterday to check for loose hoses, or broken check valves, but didn't find anything.
Thanks

edit...also, i get great boost, boost it to 13 sometimes, and runs great then too, its just the idle and the 8psi i get when the controller is off thats bothering me

Last edited by Androidmj; 08-17-04 at 01:42 PM.
Old 08-17-04, 02:14 PM
  #2  
Slower Traffic Keep Right

iTrader: (5)
 
poss's Avatar
 
Join Date: Apr 2002
Location: Albuquerque, NM
Posts: 2,192
Received 2 Likes on 2 Posts
Sounds normal to me.

When your boost controller is off, you are running at the wastegate actuator spring pressure (happens to be around 7-8 psi)


After a hard run, your fans are probably on, creating a significant enough load to bring your vacuum readings down.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
R7rexy
3rd Generation Specific (1993-2002)
19
09-02-15 10:24 AM
86glxNA
New Member RX-7 Technical
7
08-22-15 08:54 PM
pzr2
General Rotary Tech Support
1
08-15-15 08:29 PM



Quick Reply: vacuum leak? boosts a solid 8 when boost controller off



All times are GMT -5. The time now is 02:18 PM.