As I was swapping out the auto harness, I eventually have 4 vacuum hose that I'm still trying to figure out where I'm suppose to connect. I also have 2 remaining hoses that I'm also confused on where I'm suppose to connect. If anyone can help me out I'd really appreciate it.

 

Top pic =line to the map senser with the gas filter in line .The sec pic=4 lines,1 line has pcv valve and plugs into oilfiller neck , 2nd line has metal one way valve plugs into purge check valve ,(2 small lines ) 1 with oneway valve goes to solenoid to the double throttle , the front solenoid in the rack .the 2 nd line with a one way valve goes to one of the 3 nipples that group together at the front of the rats nest The other two at the front of the nest are from thevacuum chamber and a line from the pressure chamber .

 

I'll give that a shot in also referencing to the green mazda manual...also still need to figure where those 2 hoses that I still have remaining.

 

The one in your hand with the black thing may be the map senser line ,the black thing being the fuel filter .Try it for fit and let me know .

 

^ Yeah, that plastic valve in the hose of your left hand looks just like the one on the MAP sensor.

The hose in your right hand looks like one of the two that go from the solenoid rack (firewall end) to the back of the UIM. There's a third that goes from the end of the solenoid rack to the AWS actuator; could be that one as well.

 

deff the map sensor line