V-mount custom garage ducting.
#1
13B Rotary Turbo
Thread Starter
Join Date: Dec 2004
Location: South California
Posts: 649
Likes: 0
Received 0 Likes
on
0 Posts
V-mount custom garage ducting.
Just finished doing my custom ducting! Temps were very cool with just the normal ducting but now really cool with my custom ducting. Let me know of your opinions, I already have my flame suit on.
#2
13B Rotary Turbo
Thread Starter
Join Date: Dec 2004
Location: South California
Posts: 649
Likes: 0
Received 0 Likes
on
0 Posts
Sorry, but I forgot to take a picture of the ducting between the radiator and intercooler. Can not take pics of it without taking the IC off again. (lots of work) Tested it at 160mph and it held up great. The JB Weld (quick dry) lasts up to 300 degrees fahrenheit and the silicone adhesive lasts up to 400 degrees fahrenheit.
Materials used were: Aluminum sheet metal, nuts/bolts, JB Weld, and Aluminum/Metal silicone adhesive.
Materials used were: Aluminum sheet metal, nuts/bolts, JB Weld, and Aluminum/Metal silicone adhesive.
Last edited by Spirit_Rotary_7; 08-12-05 at 01:58 AM.
#5
13B Rotary Turbo
Thread Starter
Join Date: Dec 2004
Location: South California
Posts: 649
Likes: 0
Received 0 Likes
on
0 Posts
Temps did not go drastically lower, but they drop much faster than previously. While driving around town the temps are lower, but freeway usage is still about the same.
#6
13B Rotary Turbo
Thread Starter
Join Date: Dec 2004
Location: South California
Posts: 649
Likes: 0
Received 0 Likes
on
0 Posts
The red censorship is for respects to Chuck, at Rotary Extreme, to keep how the radiator mounts a secret. His V-mount is a very well thought out and quality product!
#7
13B Rotary Turbo
Thread Starter
Join Date: Dec 2004
Location: South California
Posts: 649
Likes: 0
Received 0 Likes
on
0 Posts
Radiator/Intercooler ducting in between.
Due to a friendly request I took pictures of it. Not the best quality, but you can see it.
---
---
Last edited by Spirit_Rotary_7; 08-12-05 at 02:34 AM.
Trending Topics
#9
Rotary Freak
Join Date: Sep 2004
Location: Bay Area, CA
Posts: 2,444
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Spirit_Rotary_7
The red censorship is for respects to Chuck, at Rotary Extreme, to keep how the radiator mounts a secret. His V-mount is a very well thought out and quality product!
But on the topic of the thread, the ducting looks good. Much better then the usual custom garage quality.
#10
13B Rotary Turbo
Thread Starter
Join Date: Dec 2004
Location: South California
Posts: 649
Likes: 0
Received 0 Likes
on
0 Posts
The metal piece in between the radiator and the intercooler is bent at almost a 90 degree angle to 'catch most the air' and send it upwards towards the intercooler. The ducting in between the radiator and intercooler is welded onto the intercooler and snug tight, sitting on top of the endtanks of the radiator. It is not sealed with the radiator so that the intercooler can come off at any given time. Also, the metal piece is only attached to the intercooler core and not the intercooler endtanks for a better fit. However, the ducting sits lower than the radiator endtanks to 'catch more air' and 'seal more air.'
#11
13B Rotary Turbo
Thread Starter
Join Date: Dec 2004
Location: South California
Posts: 649
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Hebbe
Hard to see with the close ups..
How have you done under the car?
I guess the Intercooler is mounted on the "rails" shown in picture one?
How have you done under the car?
I guess the Intercooler is mounted on the "rails" shown in picture one?
Originally Posted by BlueRex
Just curious if Chuck at Rotary Extreme requests this "censorship," or if it's just an unwritten rule of the V mount cult (or is the answer a secret too ?)? Reason I ask is that whenever the question of the radiator mounting is asked no one is willing to reveal this trademark secret.
But on the topic of the thread, the ducting looks good. Much better then the usual custom garage quality.
But on the topic of the thread, the ducting looks good. Much better then the usual custom garage quality.
#12
Close ups are best. Are you asking what modifications I have done to the car? The intercooler is no secret but the radiator is.
My car has no plstic under the front so I will make some my self but would like to have something to look at.
#13
13B Rotary Turbo
Thread Starter
Join Date: Dec 2004
Location: South California
Posts: 649
Likes: 0
Received 0 Likes
on
0 Posts
Oh, you mean the undertray? With the v-mount that is not 'needed' anymore. Only use for that would be to keep rocks and dirt out. However, even without the undertray, I have never seen much dirt on the back side of the radiator at all.
#15
development
Originally Posted by ptrhahn
I think all of this V-mount secrecy and "censorship" is really lame. Makes me want to buy one LESS because I can't be sure of what i'm getting.
#16
Originally Posted by ptrhahn
I think all of this V-mount secrecy and "censorship" is really lame. Makes me want to buy one LESS because I can't be sure of what i'm getting.
or perhaps its something all of us can find for 2.50 at home depot. sorry had to vent
#18
13B Rotary Turbo
Thread Starter
Join Date: Dec 2004
Location: South California
Posts: 649
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by cooljerk187
Exactly. With not being able to see everything that i would potentially throw my 2300 in, i get scared...for all i know that would be some duct tape, zip strips, plywood, or even worse... a 2x4 underneath that censorship!!
Originally Posted by cooljerk187
...or perhaps its something all of us can find for 2.50 at home depot. sorry had to vent
#21
Originally Posted by Spirit_Rotary_7
Sorry, but his brackets to hold up the radiator does not use any of those materials.
Materials used to make them definitely does not cost $2.50 from home depot either.
Materials used to make them definitely does not cost $2.50 from home depot either.
You obviously didnt sence my sarcasm. i know u wouldnt hide it if you spent that kind of money for junk, but tell us so we dont make the same mistake. The point is, i think it is stupid to "censor" that stuff. i would much rather see a picture of the quality and craftsmanship then just toss money out there for it... No matter who it is... I know rotary extreme is a good company from personal experience. But do companys like HKS hide everything from you in the pictures? No
#22
13B Rotary Turbo
Thread Starter
Join Date: Dec 2004
Location: South California
Posts: 649
Likes: 0
Received 0 Likes
on
0 Posts
I did not mean for this thread to go from the ducting to the censorship. If you wish to know more about the brackets used to hold the radiator please contact Rotary Extreme, because I do not want to be responsible for any prejudice formed against them.
All I ment for this thread was to help people come up with ideas for their v-mount ducting.
All I ment for this thread was to help people come up with ideas for their v-mount ducting.
#23
Rotary Freak
Join Date: May 2002
Location: Houston
Posts: 1,742
Likes: 0
Received 0 Likes
on
0 Posts
Chuck requested it, and I honored it as well.
The brackets holding the radiator are solid metal. The entire kit is solid. There is nothing done poorly in his kits, with the exception of the extensions you need to request to mount the undertray. Then again, I was also fighting the new oil cooler lines I put in as well.
The only downpoint to his kit is the clearance you lose, due to how the radiator is mounted, and the fans beneath it.
The brackets holding the radiator are solid metal. The entire kit is solid. There is nothing done poorly in his kits, with the exception of the extensions you need to request to mount the undertray. Then again, I was also fighting the new oil cooler lines I put in as well.
The only downpoint to his kit is the clearance you lose, due to how the radiator is mounted, and the fans beneath it.
#24
Lives on the Forum
iTrader: (9)
And that's the point. Before I spent $2600 i'd want to see detailed pictures of exactly how it goes together, what's needed, and what you "loose" in terms of clearance and why, etc.
Originally Posted by PVerdieck
Chuck requested it, and I honored it as well.
The brackets holding the radiator are solid metal. The entire kit is solid. There is nothing done poorly in his kits, with the exception of the extensions you need to request to mount the undertray. Then again, I was also fighting the new oil cooler lines I put in as well.
The only downpoint to his kit is the clearance you lose, due to how the radiator is mounted, and the fans beneath it.
The brackets holding the radiator are solid metal. The entire kit is solid. There is nothing done poorly in his kits, with the exception of the extensions you need to request to mount the undertray. Then again, I was also fighting the new oil cooler lines I put in as well.
The only downpoint to his kit is the clearance you lose, due to how the radiator is mounted, and the fans beneath it.
#25
Senior Member
iTrader: (8)
Join Date: Mar 2005
Location: north ca
Posts: 540
Likes: 0
Received 0 Likes
on
0 Posts
are really going to buy one?
Originally Posted by ptrhahn
And that's the point. Before I spent $2600 i'd want to see detailed pictures of exactly how it goes together, what's needed, and what you "loose" in terms of clearance and why, etc.