used FD's
#1
Junior Member
Thread Starter
Join Date: Nov 2001
Location: TORONTO
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
used FD's
I'm looking for a used FD around my area... is there anything I should look for especially when I shop around? Also I've heard about engine rebuilding and such things... is that only after a certain milage... I'm looking for mainly a stock one because I want to tune it my self ground up... What is the milage that I'm looking around on a used FD???
#2
Junior Member
Join Date: Nov 2001
Location: Malta, Europe
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
If an RX is taken care of, oil changes every 2,000 miles etc it can last very well above 100,000 KM. So I suggest that you find one with less than 50,000 KM or so.
As regards the mods I agree that you try to find a stock one because a heavily modified rotary can be difficult to maintain.
Good Luck.
As regards the mods I agree that you try to find a stock one because a heavily modified rotary can be difficult to maintain.
Good Luck.
#3
It's never fast enough...
Join Date: Feb 2001
Location: Miami - Given 1st place as the POOREST city in the US as per the federal government
Posts: 3,760
Likes: 0
Received 3 Likes
on
3 Posts
Here this website will come in VERY handy.
http://www.scuderiaciriani.com/rx7/
http://www.scuderiaciriani.com/rx7/
#5
everytime
Everytime you overhaul an engine, you cuting the life out of it.
If you dont port it and just go stock. 80,000km side port maybe
60,000km. Then means just changing the oil one every month, and everytime after you race, if you drift or drive curcuit at all.
GOOD LUCK
If you dont port it and just go stock. 80,000km side port maybe
60,000km. Then means just changing the oil one every month, and everytime after you race, if you drift or drive curcuit at all.
GOOD LUCK