ALuminum Block off plates may be available.....
#1
Full Member
Thread Starter
ALuminum Block off plates may be available.....
So here is the skinny. I have been trying to have a COMPLETE set of block off plates (8 of them) made out of aluminum in a quality fashion. These cover ALL the holes in the upper and lower intake and on the throttle body when you remove all the crap you don't need for the track.
See attached. Sample of 2 of the plates. The remaining plates will be of equal quality. I have gotten some real crap from other people offering steel "flame cut" or hand cut plates and threw them away. Also others never offered ALL of the plates needed for a real track set up.
The cost for the 5/16 Aluminum material and cut the "Block off Plates" is as
follows
Order quantity of (5) sets is $162.50 per set
Order quantity of (20) sets is $140.00 per set
Email me and put BOP in the subject so we can see if this will work. Cardmarc@midsouth.rr.com
See attached. Sample of 2 of the plates. The remaining plates will be of equal quality. I have gotten some real crap from other people offering steel "flame cut" or hand cut plates and threw them away. Also others never offered ALL of the plates needed for a real track set up.
The cost for the 5/16 Aluminum material and cut the "Block off Plates" is as
follows
Order quantity of (5) sets is $162.50 per set
Order quantity of (20) sets is $140.00 per set
Email me and put BOP in the subject so we can see if this will work. Cardmarc@midsouth.rr.com
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM