upgrading side lights(indicators)

Reply Subscribe

Thread Tools

Search this Thread

May 2, 2010 | 06:52 AM

turbotoaster

Thread Starter

Full Member

Joined: Apr 2009

Posts: 208

Likes: 0

From: England

upgrading side lights(indicators)

just wondering if you buy a set of 99 spec front lights the wiring is plug and play, ie same connectors or do you need to get the soldering iron out?

thanks in advance

May 2, 2010 | 07:26 AM

Ceylon

Non Runner

iTrader: (3)

Joined: Mar 2008

Posts: 2,211

Likes: 282

From: Somerset, England

They do not use the same plugs.

So you can either solder the wires into the old plugs, or buy a conversion harness.

Oh and you need a bumper that takes 99 lights of course

May 2, 2010 | 08:21 AM

turbotoaster

Thread Starter

Full Member

Joined: Apr 2009

Posts: 208

Likes: 0

From: England

time to get the soldering iron out then, unless you know a place you can by the conversion harness from?

May 2, 2010 | 06:38 PM

GreatShamanGT

Roxann7

iTrader: (9)

Joined: Oct 2007

Posts: 1,421

Likes: 3

From: Seattle, WA

Quote:

Originally Posted by turbotoaster

time to get the soldering iron out then, unless you know a place you can by the conversion harness from?

cork sport, or just buy a set from Purerx7, his come plug and play. That's what it says on his website.

May 2, 2010 | 07:04 PM

MartinCYM

Full Member

Joined: May 2010

Posts: 83

Likes: 0

From: Auckland, New Zealand

I did the conversion, you can get the old connectors to fit in the turn signals. Just get some scissors and nibble bits off untill they fit. Be careful not to take too much off though....