LAMEtHIng

iTrader: (1)

I have searched, and searched as usual. I have found tons of very useful information, but nothing explicit enough for me, apparently. I am not a mechanic, but I know my car pretty well. At least I know the UIM area well.


ANYWAY I am installing 1300cc secondary injectors and putting my 850cc into the primaries. I have had the primary rail shaved 1/8" for the stock 850cc's. Now all I am confused about is the parts of the injector (grommets, o-rings, etc). Unforunately I took out my fuel rails 2 weeks ago (expecting to put things back in the next day, but you know how that goes) and I forgot where exactly the "grommets" go, etc. Also, where are these so called diffusers and their o-rings? The secondaries are in the rail already so they are fine (ordered the whole rail), now the primaries how EXACTLY are they supposed to be put into the rail? I'd really appreciate it...also pictures are good, most pics that I found were going to answer my questions ended up being bad links now.

Thanks everyone.

LAMEtHIng

iTrader: (1)

bump

Trexthe3rd

You need to practice searching a little more.

Injectors

Page F-105

You'll need Adobe Acrobat reader

AgentSpeed

Make sure you spray a little carb cleaner on the o-rings before trying to snap them in. (so they don't tear)

LAMEtHIng

iTrader: (1)

Yeah, I know about lubing the o-rings up.


As for the shop manual. I never thought of searching in it, and I have the damned manual. I don't really know why I didn't even look for it. WOW and F-105 has a beautiful diagram!! See I actually never did find I link like this though in my searching, perhaps people can use this link now. It rocks! (most people probably just have the common sense to query the shop manual before hand though)