transmission mount


Welded my exhaust hanger to oem hanger, no movement, it was banging against the diff and tank


Torque damper


Sparco Torino to replace the Pro2000 bucket



Replace the HD that was not working most of the time, HD/DVD 7' touch screen


Oh and when i had the car tune i found a weird spike sometimes, or sometimes it would not get full boost.. well when i was under the car today putting in the transmission brace, i notice a slight crack in the line to the TIAL, touched it and it cracked..


Replaced it with a fuel hose for more strength


thats it for the big stuff, just been cleaing some of the routing of the hoses, zip ties here and there, etc...

 

Very nice 7. I have a couple questions, though.

How is that weld coming along on the exhaust? I'm afraid it will crack the weld/bend the bracket if you start driving a lot. I understood the hangers were rubber for a reason.

And how are you liking your new seat? It looks really nice, but sometimes hard to fit seats.

Randy

 

Exhaust:
it was banging against the gas tank and Diff so i thought it would be better, it has about 1 1/2 in swing each way if i push it.. I dont have any problem, put about 150 since the weld and in that time i've done WOT 1 and 2, no problem, check the welds on the whole exhaust and no problems. I guess only time will tell but i dont see anything wrong, heck the transmission and diff has busing too but i have everythign solid now to, people have done so with no ill effects

Seats
Love the seat, lower then OEM, hugs great, looks great, only bad part is it barely touches the door and i had to remove both side ***** to make it fit the car. I just adjusted the seat to my liking and thats it, it still has the quick tilt but the micro tilt is done with a wrench now if it need to, but driving 2weeks with it is now and it way better then the bucket sparco pro2000