Hey community.
Looking help solve a mystery for me. I have a few wires unplugged and wanted to see if someone can identify the color of the wire. The picture is of a connection just under the oil filter mounted on the rear iron.

I have a green and yellow stripe and a blue with white spots on it. I also have a separate wire that is black with a red stripe that comes off the same harness where the other two come off of.

 

The black with red is the bridge wire for the water level sensor. There will be an associated plug on the charge harness somewhere.

the other one I think is water temp or oil pressure. Should be pretty easy to figure out

 

That sensor circled is the water temp sender for the gauge. I'm not sure of the wire color.

There is a harness guide on the forum that may help you and you can check the shop manual for the wire colors.

There originally would have been an oil pressure sender there, it looks like you have a line going to a sender or something for oil pressure. Also those thin nylon tubes with ferrules on the ends are SUPER leak prone especially with FD oil pressure.

Dale