3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Uhhh..... what the helios?

Thread Tools
 
Search this Thread
 
Old Apr 10, 2005 | 01:25 AM
  #1  
Comet's Avatar
Thread Starter
Drive to the unknown.
Tenured Member 10 Years
 
Joined: Jul 2004
Posts: 337
Likes: 1
From: Missoula, Montana
Uhhh..... what the helios?

M'kay, so I installed an auto meter boost gauge, and I show about 17-20 on the vaccuum side, but when I come into "boost" the gauge stops at 0. Also, a lot of the time I don't seem to be boosting on the secondary turbo, I looked at my check valves and a schematic, and it seemed ok, but anything Semi-cheap that I could look at to maybe be the cause of this problem?
Reply
Old Apr 10, 2005 | 06:53 AM
  #2  
WaLieN's Avatar
Call me gramps!
Tenured Member: 20 Years
 
Joined: Jul 2003
Posts: 2,334
Likes: 0
From: Detroit, MI
It sounds like you have an absolute boost leak, since you don't make boost at any rpm/gear. Check all of the hoses that see boost (all the 1" hoses, couplers, accordian hoses, etc.). It could be something as simple as disconnected hose. If you ever need any help dealing with the turbos, give me a ring on AIM.

http://www.autosportracetech.com/RX-7/rx7stuff.htm -- That link should help you out.
Reply
Old Apr 10, 2005 | 07:38 AM
  #3  
dgeesaman's Avatar
Moderator
Tenured Member: 20 Years
Liked
Loved
iTrader: (8)
 
Joined: May 2002
Posts: 12,313
Likes: 27
From: Hershey PA
Start by replacing the check valves. $20 from Dale Clark. And look for a boost leak in the intercooler pipe couplings, like Walien said.

Dave
Reply
Old Apr 10, 2005 | 10:52 AM
  #4  
RevZempoe's Avatar
Trying not to be stock
Tenured Member 05 Years
 
Joined: Jan 2005
Posts: 374
Likes: 0
From: Richmond, VA
sounds like the problem I'm having...hmm right now the car's in the shop but then when it's out I'll check all the hoses and such to see if I'm having any leak. i don't have a gauge hooked up yet but I get that exact same feel. And I invested in some check valves by dale clark
Reply
Old Apr 10, 2005 | 11:01 AM
  #5  
pearlyellow's Avatar
accepting donations
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 408
Likes: 0
From: Omaha, NE
My 2cents worth, I was having the same problem and ended up finding a gaping crack in the hose going from the y-pipe to the bov
Reply
Old Apr 11, 2005 | 12:23 PM
  #6  
Comet's Avatar
Thread Starter
Drive to the unknown.
Tenured Member 10 Years
 
Joined: Jul 2004
Posts: 337
Likes: 1
From: Missoula, Montana
Disco, my intake gasket is on the way, and I'm gonna swap all the hoses out on WED. I'll let ya'll know what turns up.
Reply




All times are GMT -5. The time now is 08:03 PM.