3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Two guestions........

Old Dec 29, 2001 | 11:45 PM
  #1  
Sweet7's Avatar
Thread Starter
Anti-EMO!
Tenured Member 15 Years
 
Joined: Dec 2001
Posts: 363
Likes: 0
From: Hillbilly, Colorado
Two guestions........

Ok guys first off, i have an exhaust leak on my new FD:mad Ive only pinpointed that its coming from under my hood But i was curious, is this common cause my old FD never ever had one. Where is the most common place for exhuast leaks on FDs and how much would it cost to fix?

Also im thinking of buying a BOV.........which one would sound best on stock twins?
Reply
Old Dec 30, 2001 | 12:21 AM
  #2  
jr's Avatar
jr
Senior Member
Tenured Member 20 Years
 
Joined: Feb 2001
Posts: 741
Likes: 1
From: Queens, NY
If you have one of the earlier build date 93's then a lot of the gaskets were paper instead of metal. The exhaust manifold to downpipe/precat gaskets would be the first place to check. I think the gasket is about $45 and your probably looking at about 4 hours labor. That might be a good time to swap out your precat for a downpipe too.
Reply
Old Dec 30, 2001 | 12:22 AM
  #3  
Brent Dalton's Avatar
Sua Sponte
Tenured Member: 20 Years
Liked
iTrader: (31)
 
Joined: Aug 2001
Posts: 3,125
Likes: 9
From: Germany
I would check all the connections on the exhaust(i.e. the gaskets) first. I wouldn't waste my money on the BOV's, if sound is all your wanting, pull off the BOV hose that goes to the intake box and it'll give you the ppssssshhh sound. Just my opinion. Later

Memphis
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:20 PM.