3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Two guestions........

Thread Tools
 
Search this Thread
 
Old 12-29-01, 11:45 PM
  #1  
Anti-EMO!

Thread Starter
 
Sweet7's Avatar
 
Join Date: Dec 2001
Location: Hillbilly, Colorado
Posts: 363
Likes: 0
Received 0 Likes on 0 Posts
Two guestions........

Ok guys first off, i have an exhaust leak on my new FD:mad Ive only pinpointed that its coming from under my hood But i was curious, is this common cause my old FD never ever had one. Where is the most common place for exhuast leaks on FDs and how much would it cost to fix?

Also im thinking of buying a BOV.........which one would sound best on stock twins?
Old 12-30-01, 12:21 AM
  #2  
jr
Senior Member

 
jr's Avatar
 
Join Date: Feb 2001
Location: Queens, NY
Posts: 741
Likes: 0
Received 1 Like on 1 Post
If you have one of the earlier build date 93's then a lot of the gaskets were paper instead of metal. The exhaust manifold to downpipe/precat gaskets would be the first place to check. I think the gasket is about $45 and your probably looking at about 4 hours labor. That might be a good time to swap out your precat for a downpipe too.
Old 12-30-01, 12:22 AM
  #3  
Sua Sponte

iTrader: (31)
 
Brent Dalton's Avatar
 
Join Date: Aug 2001
Location: Germany
Posts: 3,124
Received 7 Likes on 6 Posts
I would check all the connections on the exhaust(i.e. the gaskets) first. I wouldn't waste my money on the BOV's, if sound is all your wanting, pull off the BOV hose that goes to the intake box and it'll give you the ppssssshhh sound. Just my opinion. Later

Memphis




All times are GMT -5. The time now is 10:20 AM.