I'm about to perform the Rob Robinette turbo simplification and I want to know if I can just leave all the soloniods the way they are, meaning leaving the soloniod rack there and just reroute the hoses to Rob's diagram? Problem is that my turbos are not coming on right and I know I must of put hoses in the wrong place and rather just do the simplification. Thanks

 

The rack can stay in place. Follow the diagram.

 

Don't forget to leave your FUEL PRESSURE REGULATOR SOLENOID connected correctly. It's the one on the orange plug, closest to the firewall. I didn't use any resistors, I just left the solenoids on their respective plugs. Try to cut your hoses as small as possible or you will end up with SPAGHETTI (see pic, hose job ~90% complete).