Turbo Control solenoid valve..
05-04-02, 12:36 PM
#1
Full Member
Thread Starter
Join Date: Dec 2001
Location: Norway, Europe
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Turbo Control solenoid valve..
Just broke one of the nipples of my Turbo Control Solenoid.
My problem is that here in Norway it will probably take 2 or 3 weeks to order a new one.
But is it possible to use my EGR solenoid valve to replace the Turbo Control? They seem to be very similar.
I don't have the EGR system on my car so I guess it wouldn't hurt to remove the EGR valve and plug the vacuum hoses.
Or am I wrong??
My problem is that here in Norway it will probably take 2 or 3 weeks to order a new one.
But is it possible to use my EGR solenoid valve to replace the Turbo Control? They seem to be very similar.
I don't have the EGR system on my car so I guess it wouldn't hurt to remove the EGR valve and plug the vacuum hoses.
Or am I wrong??
05-04-02, 01:11 PM
#2
Rotary Freak
Join Date: Jan 2002
Location: Overland Park, KS
Posts: 2,360
Likes: 0
Received 0 Likes
on
0 Posts
One thing you could do if they look the same, which i dont know cause i have a 93, is check the part number on them. But really i have no clue since i have never seen an erg solenoid before
05-09-02, 11:33 AM
#4
WTF is wrong with it now?
Join Date: Oct 2001
Location: London, ON
Posts: 1,492
Likes: 0
Received 0 Likes
on
0 Posts
If you mean the turbo control in the solenoid rack, you should be able to substitute the EGR solenoid. In the service manual, they use the same test for all the solenoids in the rack. Therefore, if you move the turbo control hoses to the EGR solenoid, swap the connectors, and plug the EGR hoses, you SHOULD be OK. Not 100% sure.
Thread
Thread Starter
Forum
Replies
Last Post
turbo-minivan
General Rotary Tech Support
69
02-04-16 12:29 AM
