When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Yeah really trying to find exact same one with bolt pattern so I don't need to drill more holes smh. And wing cards don't have screw in cards they are like double sided tape. I feel like it's gotta be a rep.
Originally Posted by Redbul
I have seen just the replacement screw covers on Buyee.
Almost looks like a Panspeed. Sometimes the replica makers will change somewhat. I am trying to think of the California replica maker. Something like Vesero?
I stand corrected. The Racing beat Type 2 and Mazdaspeed are almost identical except the Mazdaspeed one has adjustment screws under that paned on the ends. No such adjustment screws or panel for the RB wing.
That remined me local kid smacked up his burnout kit. I think replacement bumper was about $450. But he had to switch to S6 stock due to insurance limits.
My brother-in-law' car has something similar. We have not figured out the maker for his car either. His car came like that from Japan in 2015.
Thank you guys definitely looks like it's probably the burn-out appreciate you guys!! If anyone knows where I could find side cards for wing I'd appreciate it trying to avoid doing whole new wing unless the holes matched up that would be beautiful ahah.
Thank you guys definitely looks like it's probably the burn-out appreciate you guys!!
Not a burnout bumper, the openings for the oil coolers and radiator/IC are too large. The front bumper that you are asking for is made originally by Vertex (but ViS makes/made a replica)
For anyone that is interested, here are the differences between the Racing beat and MS wing:
Originally Posted by T.Seuf
I have had both. Still have what I believe to be an authentic MS wing.
Racing beat wing type II (never installed-dry fit only)
- slightly beefier blade
- 2 angle adjustments
- 2 tamperproof Allen screws to retain endcaps.
- 3 holes drilled direct into fibreglass on each side for mounting. On mine, they didn't line up perfectly to the stock 99 holes.
- 95% true to shape and design of MS
- slight gapping on leading edge (nearest the hatch glass), fitment would be 9/10 on a dark colour such as black.
- Brand markings clearly imprinted on wing
MS Wing.
- Fitment near perfect. Slightly smaller blade
- fixed angle
- encaps have no screws, only double sided tape
- 2 holes with backmounted nuts welded to flat iron for mounting. Recessed design to hide mounting tape.
- holes appear to match stock 99 spec holes. (They are located centre of the indents underside edges of the hatch. Fitment looks spot on and very minimal gapping even on light colour such as silver.
Side note... would be very interested to see an Odula blade customized to fit a MS wing.
