I searched a bit and was unsuccesful. Iwas wondering if any one could explain to me how i would go about compression testing my motor. I tried to take one of the plugs out and hand crank the motor, and i was unable to get any compression. I was able to get compresion when i tried to start the car. I was just thinking that if i had bad compression in two of the three chambers the good one would hide it on the compression tester i was using. Is my thinking logical or am i loosing it? PLEASE I NEED LOTS OF HELP?!?!?!?

 

You can't hand crank it. You have to "start" it. Remove the EGI relay and plug wires and fire away.

 

http://www.scuderiaciriani.com/rx7/c...sion_test.html

http://robrobinette.com/compression.htm

All links found here: https://www.rx7club.com/3rd-generation-specific-1993-2002-16/faq-3rd-gen-other-useful-links-68640/ Under FAQ for 3rd Gen & other useful links in this section. Next time search/try the stickys at the top of the page in this section!

-Alex

 

thanks Guys all help is appriciated as usual. (alex im new to the fourm scen so im still learning thank you for the tip i did not know?)