trouble removing twins
#1
Full Member
Thread Starter
Join Date: Aug 2004
Location: westchester, NY
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
trouble removing twins
so everything was goin smooth as can be, untill i go to take out the last bolt hoding the turbos to the exh manifold.... It turned a few times then became very hard to turn, then apon forcing it, the nut now just spins in place...about half way off... i juat wanaaa
theres always one it seems. its gota be the hardest one to get too also.
All i can think to di is have someone prying the turbo housing out while i try to remove the nut... hope it works. If anyone has any supernatural ideas pleeez let me know
theres always one it seems. its gota be the hardest one to get too also.
All i can think to di is have someone prying the turbo housing out while i try to remove the nut... hope it works. If anyone has any supernatural ideas pleeez let me know
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
ls1swap
3rd Generation Specific (1993-2002)
15
09-08-15 05:30 PM
risingsunroof82
1st Generation Specific (1979-1985)
8
09-07-15 01:11 PM