Torque specs for putting turbos back together
#1
Torque specs for putting turbos back together
Okay for some reason I cant find the area in the FSM where the torque specs are for reassembling turbos that were disassembled. I have my turbos apart for porting the wastegate and no idea what the housing bolts and oil and coolant banjo bolts specs are.
Another question as well, Inspecting my turbos it may be possible that their blown, Ive never had any smoke on them at all, Primary turbo looks to be in some oil but can be from the PCV system. Turning them there is maybe 1mm of play, but they are also not free moving, meaning there is some resistance when turning them.
Another question as well, Inspecting my turbos it may be possible that their blown, Ive never had any smoke on them at all, Primary turbo looks to be in some oil but can be from the PCV system. Turning them there is maybe 1mm of play, but they are also not free moving, meaning there is some resistance when turning them.
#2
RX-7 Bad Ass
iTrader: (55)
Just tighten up snug. For the banjo bolts, you can typically "feel" when the washer crushes when you tighten them up.
None of those fasteners are crazy tight, either.
Dale
None of those fasteners are crazy tight, either.
Dale
Thread
Thread Starter
Forum
Replies
Last Post
Kyo
2nd Generation Specific (1986-1992)
3
08-14-15 02:00 PM