Are these 18s or 17s? (+ Reports of SSR Comps bending)
#1
Junior Member
Thread Starter
Join Date: Apr 2001
Location: Toronto, ON, CAN
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Are these 18s or 17s? (+ Reports of SSR Comps bending)
In everyone's expert opinion, what diameter are these Te37s?
I narrowed the wheel choice down to the Volks, but Im not sure what size to go with...
https://www.rx7club.com/forum/showth...25&pagenumber=4
This car is perfect......
Thanks,
Dan
PS : Decided against SSR Comps due to posts on miataforum.com regarding bending.....not sure if that it due to the smaller diameter wheels on miatas but fyi...
I narrowed the wheel choice down to the Volks, but Im not sure what size to go with...
https://www.rx7club.com/forum/showth...25&pagenumber=4
This car is perfect......
Thanks,
Dan
PS : Decided against SSR Comps due to posts on miataforum.com regarding bending.....not sure if that it due to the smaller diameter wheels on miatas but fyi...
#3
Junior Member
Thread Starter
Join Date: Apr 2001
Location: Toronto, ON, CAN
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Here's the car...
and the Comp links...
http://www.miataforum.com/ubb/ultima...c&f=3&t=002528
http://www.miataforum.com/ubb/ultima...c&f=3&t=002576
And what they look like bent....
ugh...
http://freepages.autos.rootsweb.com/...iata/ssr-comp/
dan
and the Comp links...
http://www.miataforum.com/ubb/ultima...c&f=3&t=002528
http://www.miataforum.com/ubb/ultima...c&f=3&t=002576
And what they look like bent....
ugh...
http://freepages.autos.rootsweb.com/...iata/ssr-comp/
dan
Last edited by WooshJr; 02-22-02 at 04:33 PM.