Thanx, I fix my Problem with the Profec B
#1
Full Member
Thread Starter
Join Date: Sep 2001
Location: Caracas, Venezuela
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Thanx, I fix my Problem with the Profec B
Now my Profec B is working perfect!
I didnīt know that the bleeder solenoid outlet at the wastegate actuator should be capped -my turbos are non sequencial-
I bought the car 3 months ago with the boost problem - boost to 15 psi easily, before Profec B-
... but, why that outlet was not capped? so, the pill in the hose between the turbos and the wastegate actuator was not working, the spring in the actuator was never compressed.
Before me, the tuner of the car was the only person that touched the rex, so, what happened?
He drove the car -boosting to 15 psi- and only told me that I need a boost controller. Why he did not check the actuator and hoses?
Well , I am too new in the rex stuff but Iīm learning bit by bit.
Thanx to all that help me with this problem!
I didnīt know that the bleeder solenoid outlet at the wastegate actuator should be capped -my turbos are non sequencial-
I bought the car 3 months ago with the boost problem - boost to 15 psi easily, before Profec B-
... but, why that outlet was not capped? so, the pill in the hose between the turbos and the wastegate actuator was not working, the spring in the actuator was never compressed.
Before me, the tuner of the car was the only person that touched the rex, so, what happened?
He drove the car -boosting to 15 psi- and only told me that I need a boost controller. Why he did not check the actuator and hoses?
Well , I am too new in the rex stuff but Iīm learning bit by bit.
Thanx to all that help me with this problem!
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
03-20-18 01:54 PM
Devon300zx
2nd Generation Specific (1986-1992)
15
09-16-15 06:57 AM