3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Swapping ABV and CRV valves??

Thread Tools
 
Search this Thread
 
Old Jul 29, 2010 | 08:59 PM
  #1  
zeroG's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 10 Years
iTrader: (28)
 
Joined: Aug 2008
Posts: 1,149
Likes: 0
From: Miami, FL
Swapping ABV and CRV valves??

I've been having issues where I sometimes loose boost from my second turbo and I found the CRV valve to be faulty. I've already bought another valve, but in the mean time I read in one of the troubleshooting guides that it's okay to swap the CRV valve with the ABV/BOV valve?

I was going to swap them to see how the car reacts, but I wanted to make sure if it's really okay to do that? I don't want to swap them and then blow the good ABV/BOV valve.

Also, I think for some reason my car might have 2 CRV valves anyway. I've seen pictures and the stock ABV/BOV valves are usually Black. But instead my car has 2 Brown valves. The labels on both of them have peeled off so I can't see what it says on there.

So if anyone can help me out with that I'd appreciate it. Thanks,
Reply
Old Jul 29, 2010 | 09:18 PM
  #2  
ttmott's Avatar
Senior Member
Tenured Member 10 Years
iTrader: (1)
 
Joined: Aug 2006
Posts: 398
Likes: 8
From: Space Coast Florida
Different spring pressures. They open at different set points.
Reply
Old Jul 29, 2010 | 09:40 PM
  #3  
zeroG's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 10 Years
iTrader: (28)
 
Joined: Aug 2008
Posts: 1,149
Likes: 0
From: Miami, FL
Originally Posted by ttmott
Different spring pressures. They open at different set points.
That I knew, I wanted to know if I swap them temporarily if it'll cause any other problems?

But also now I don't even know if either of them are ABV/BOV valves since both the ones that are on there are Brown colored?
Reply
Old Jul 29, 2010 | 10:10 PM
  #4  
Mahjik's Avatar
Mr. Links
Tenured Member 20 Years
iTrader: (1)
 
Joined: Aug 2001
Posts: 27,595
Likes: 43
From: Kansas City, MO
Originally Posted by zeroG
That I knew, I wanted to know if I swap them temporarily if it'll cause any other problems?
No

Originally Posted by zeroG
But also now I don't even know if either of them are ABV/BOV valves since both the ones that are on there are Brown colored?
When you remove them, you'll see they have a label on them. One will be labeled ABV, the other CRV (unless the previous owner removed the labels).
Reply
Old Jul 29, 2010 | 11:07 PM
  #5  
zeroG's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 10 Years
iTrader: (28)
 
Joined: Aug 2008
Posts: 1,149
Likes: 0
From: Miami, FL
Originally Posted by Mahjik
No



When you remove them, you'll see they have a label on them. One will be labeled ABV, the other CRV (unless the previous owner removed the labels).
Thanks, and yeah I mentioned it above, the labels have faded or peeled off so I can't read what's on there
Reply
Old Jul 30, 2010 | 06:08 AM
  #6  
ACCR's Avatar
Full Member
Tenured Member 10 Years
 
Joined: Sep 2007
Posts: 60
Likes: 0
From: Slovenia
Usually the brown one is CRV and black one is ABV.... that is in my case. And when I order the new CRV and ABV, the CRV was brown and ABV was black... so you probably have two CRVs. I have a stock 1999 Jap Rx7. Hope this will help you a little.
Reply
Old Jul 30, 2010 | 08:39 AM
  #7  
Mahjik's Avatar
Mr. Links
Tenured Member 20 Years
iTrader: (1)
 
Joined: Aug 2001
Posts: 27,595
Likes: 43
From: Kansas City, MO
Originally Posted by zeroG
Thanks, and yeah I mentioned it above, the labels have faded or peeled off so I can't read what's on there
If you haven't removed them completely, you might do that first as it might be more apparent which is which once they are removed. If the labels are truly gone, then it doesn't really matter. Just mark them as you remove them as to where they were originally installed.

Even then, unless you test them using a MityVac or something, you won't know if they were originally installed in the proper locations if the labels are gone. To be honest, the differences are so minor that I doubt you would notice much of a difference if they are swapped.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cleann88
General Rotary Tech Support
4
Jan 15, 2022 11:28 AM
SakeBomb Garage
SakeBomb Garage
9
May 11, 2020 10:04 AM
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
jakeishness
2nd Generation Specific (1986-1992)
11
Sep 11, 2015 11:33 AM
Tem120
3rd Generation Specific (1993-2002)
4
Sep 7, 2015 09:53 AM




All times are GMT -5. The time now is 04:35 PM.