Suspension bushings help needed
#1
JAck Fisher
Thread Starter
Join Date: Nov 2005
Location: NC
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Suspension bushings help needed
I am looking for aftermarket bushing for the rear Lower Control arms on my FD.
I have found replacements for all of the other liquid filled bushings on the car but I cannot find any for the rear lower control arm.
If anyone can point me in the right direction It would be greatly appreciated
I have found replacements for all of the other liquid filled bushings on the car but I cannot find any for the rear lower control arm.
If anyone can point me in the right direction It would be greatly appreciated
#2
Eats, Sleeps, Dreams Rotary
iTrader: (14)
I think the only liquid filled suspension bushings are the differential mount bushings.
Each rear LCA has two pillowball bushings (OEM is the best best here) and one inner rubber bushing. Mazdaspeed used to make these inner bushings but they have been discontinued. I'm surprised the set you are buying for the other rubber bushings does not include these?
https://www.rx7club.com/forum/showthread.php?t=648765
Each rear LCA has two pillowball bushings (OEM is the best best here) and one inner rubber bushing. Mazdaspeed used to make these inner bushings but they have been discontinued. I'm surprised the set you are buying for the other rubber bushings does not include these?
https://www.rx7club.com/forum/showthread.php?t=648765
#3
needs more track time
iTrader: (16)
I am looking for aftermarket bushing for the rear Lower Control arms on my FD.
I have found replacements for all of the other liquid filled bushings on the car but I cannot find any for the rear lower control arm.
If anyone can point me in the right direction It would be greatly appreciated
I have found replacements for all of the other liquid filled bushings on the car but I cannot find any for the rear lower control arm.
If anyone can point me in the right direction It would be greatly appreciated
The lower control arm bushings are not liquid filled. I think the only option is OEM which you can get from Ray at Malloy (see FAQ for his contact info). Here is a diagram provided by Wanklin for the poly urethane Super Pro bushings he sells.
#4
JAck Fisher
Thread Starter
Join Date: Nov 2005
Location: NC
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
thnx
Thanks for the help I am new to the FD, I have had an FC for a long time and there is a lot of new stuff that I am still trying to figure out on this thing.
#6
Mr. Links
iTrader: (1)
(888) 533-3400 , (703) 490-8170 , fax: (703) 490-3864 , hmkparts@aol.com
Thread
Thread Starter
Forum
Replies
Last Post
GrossPolluter
Suspension/Wheels/Tires/Brakes
12
08-15-15 10:32 PM