anyone have any idea why a previous owner would have spliced wires into the inputs for both the trailing coils? replaced my spark plug wires and found it yesterday
EDIT: just checked, and the wires are spliced into the positive power supplies to the training coils. and them they are Y'd to a common wire that is loomed and ran behind the UIM, itdoesn't connect to anything though. just taped off at the end.

 

Ign box?

 

Could have been for a remote start unit?

 

And why would you splice into the ign coil for a remote start unit? and please dont say tach signal, because like I posted above, they are spliced into the positive feed side, which always shows a positive, hence no indication of rpm.
BTW I did the stealth install of a viper 7900 on this car, and there are much easier ways to get a tach signal.

I could see that, but then why only the trailings?